Painting and Decorating Made Easier!

Paints and coatings are similar. What separates them from each other is their ability to retain color and their durability of sheen.

 

The typical factors, which can affect this, are (1) surface exposure to the sun, (2) cleanliness, and (3) humidity.

 

First of all, to find the “best possible paint” for your application, consult paint store and manufacturer recommendations.

 

As a rule, you get what you pay for. Normally, the best quality paint will have the highest price. With the modern development in coatings research, the quality of paint is at its highest level. Now, there are paints which combine primer as part of their formulation.

 

Usually, I prefer to use a suitable primer, then let it dry. And I apply a top coat, especially designed for that surface and that primer-top coat combination. To each his own, however.

 

Each surface requires a paint that is specific to its requirements. You wouldn’t put latex paint on bare steel. And, you wouldn’t prime the steel with the recommended primer and then apply a latex finish paint. If you don’t know the difference, you might.

 

There are “best paints” for every class of surfaces. Here are a few of them.

 

  1. Exterior masonry. Use an elastomeric coating. It’s a high-build, water-proofing material.
  2. Steel. Use epoxy primer and finish. They provide an extremely durable, chemical resistant finish.
  3. Interior drywall. Use acrylic latex. It leaves a highly washable, color retentive finish.
  4. Non ferrous metal. Use oil galvanizing primer. It has excellent adhesive properties.
  5. Automotive. Use urethane. It has ultimate durability, high color retention, resist abrasions.
  6. All surfaces. Use oil-based paint. It provides excellent durability, color retention, resist stains.

 

Then, there are my “best brand paint picks.” Opinions may vary. Yet, there are standards of quality, cost and reputation for each manufacturer.

 

  1. Interior/Exterior house paints: #1 Glidden; #2 Sherwin Williams; #3 Behr.
  2. Wood finishes: #1 Minwax; #2 Olympia.
  3. Masonry: #1 Glidden; #2 Sherwin Williams.
  4. Fine finish metals: #1 DuPont, #2 Sherwin Williams.
  5. Industrial coatings: #1 Sherwin Williams.

 

There are many paint and coatings’ manufacturers out there. Do your research, especially when you are questioning a surface’s compatibility with a particular paint type. Paint failures or a reduced life of the sheen can occur if the wrong selection is made.

 

 

A STORY OF EXTREMES

 

As a commercial painter, I was once assigned a job to decorate the front offices and lobby of an automotive body shop. My job was to paint all of the drywall ceilings, with a flat white latex, and to apply vinyl wall coverings to all of the walls and the electrical cover plates. It sounded simple enough.

 

But as I got started, I saw several of the body shop workers carrying stack s of wood moulding into their service area. And when the doors arrived – about 12 of them, they were taken to that area as well.

 

I was busy doing my own work. Until one day, I went back and discovered a couple of body shop employees working on the doors and woodwork. They were painting them.

 

I thought:  Well, that’s just fine. Then, I realized that the paint they were using was not the run of the mill latex or oil I would have used. I was shocked, yet totally amazed at what they were doing.

 

The owner had chosen to finish his woodwork with automotive paint. I never heard of such a thing. On his own, the owner decided to experiment.

 

The product he chose to use was a two-part urethane with a clear coat final finish.  The finish was known for its unsurpassed durability and extremely high gloss.

 

Okay! I waited and continued with my duties. In the last days of my work, I got to see the carpenters putting everything up. Room by room, they installed the doors and the trim. Then the body shop guys sprayed the last coat of clear coat.

 

We had a party upon completion of the project. And we got to witness the end result. It was beyond words.

 

THE DOORS! I’m not kidding. You could see yourself. When you walked along the casing or baseboard, you could see your reflection as you walked by. Not only that: This interior finishing had the most durable finish I had ever seen.

 

When I talked to the owner, he said: “I want my shop to be the only one of its kind. I want it to be perfect. I don’t care how long it takes. And money is no object.”

 

By the way, he invited shop owners from all over the area to the party. So they could admire the work done on his body shop. And, I even got to take a bow.

 

*****************************************************************************

Creative results are often the harmonious blend of the norm with the impossible.

*****************************************************************************

 

Thank you for visiting “Painting with Bob.”

Copyright 2016. Robert D. Hajtovik. All rights reserved.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Tag Cloud

%d bloggers like this: